My understanding of 56K serial is that it won't work with a T1 (only with
56K). It also uses pins 1,2 & 7,8 vs. the T1 pins of 1,2 & 4,5. I've only
installed one (they seem silly to me, might as well get a fractional T1 at
128K, or just use a stinking modem instead).
--
Jason Roysdon, CCNP+Security/CCDP, MCSE, CNA, Network+, A+
List email: [EMAIL PROTECTED]
Homepage: http://jason.artoo.net/
""Jeremiah Wegernoski"" wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> I recently purchased a 2610 with a 56/64k DSU/CSU card in it.
>
> My question is, what would be the easiest way to implement it with the
rest
> of
> my lab.
>
> Rest of the lab consists of:
>
> 2503, 2504, 2509, 2513, and a 4000 as the frame relay switch.
>
> Thanks a bunch for any suggestions or information offered!
> FAQ, list archives, and subscription info:
http://www.groupstudy.com/list/cisco.html
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=1472&t=1471
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
