Recall that it's AKA CBAC (Context-Based Access Control)
http://www.cisco.com/warp/public/707/index.shtml#IOS
There are a ton of examples. Basically, you ACL the outside interface to
block everything (or open a few holes for whatever public services you
host), and then you apply the firewall inspect name to whatever inside
interfaces you want it to look at to allow reflexive traffic back in through
the ACL.
http://www.cisco.com/warp/public/793/ios_fw/cbac2.html
--
Jason Roysdon, CCNP+Security/CCDP, MCSE, CNA, Network+, A+
List email: [EMAIL PROTECTED]
Homepage: http://jason.artoo.net/
""Circusnuts"" wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> Any ideas where to find configuration info dealing with the firewall side
of
> the IOS. I found a link on the CCO, but it really only covers very basic
> information. Specifically- I'm dealing with version 12.0(9).
>
> Thanks
> Phil
> FAQ, list archives, and subscription info:
http://www.groupstudy.com/list/cisco.html
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=1539&t=1529
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
