Forget the MAU. The lab has a 3920 switch now that you will have to configure with two VLANs for your Token Ring connectivity. Other than that it looks good. HTH Darren At 12:05 PM 04/23/2001 -0400, WEN JIA YANG wrote: >Equipment Name > >Token Ring MAU(8 ports) 28v >Ethernet Hub(C1900 12 10M ports) 28v >Cisco 2511( 1 eth, 2 serial ,16 async) 28v >Cisco 2513( 1 ethernet, 1 token ring, 2 serial) 28v >Cisco 2503( 1 ethernet, 1 bri, 2 serial) 28v >Cisco 4500( 2 ethernet, 4 serial*2) 18v >Catalyst 5002 (1supervisor engine II, 12 port 10/100 ethernet moudle)18v >ISDN BRI Emulator (2 port S/T interface) 28v >RJ 45 Patch Panel ( 16 ports) 28v >Serial Patch Panel ( 48 ports) 18v >RJ 45 Cable 10Lu >Serial Patch Panel Cable 8Lu > > > >What do you think of my plan?please offer some advice,tell me anything I >need to add. >or anything that is not necessary? >FAQ, list archives, and subscription info: >http://www.groupstudy.com/list/cisco.html >Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] Darren S. Crawford Lucent Technologies Worldwide Services 2377 Gold Meadow Way Phone: (916) 859-5200 x310 Suite 230 Fax: (916) 859-5201 Sacramento, CA 95670 Pager: (800) 467-1467 Email: [EMAIL PROTECTED] Epager: [EMAIL PROTECTED] http://www.lucent.com Network Systems Consultant - CCNA Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=1623&t=1623 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
