Hi,
If both of the X25 devices may start X25 sessions, you should add
configurations like below on the routers.
On 3600:
x25 routing
x25 route 91251144 int serial X
x25 route 91261144 IP 10.1.1.2 (XOT 10.1.1.2 on new IOS versions)
On 7500:
x25 routing
x25 route 91261144 int serial Y
x25 route 91251144 IP 10.1.1.1
You may watch the session establishment problems with "debug x25 events"
command on both sides. Look for the originator and the reason code part of
the clear request packet. It will be very useful to determine the problem.
Bulent Sahin.
----- Vzg|n ]leti -----
Kimden: "Dian Rudianto"
Kime:
Gvnderme tarihi: 25 Nisan 2001 Gar~amba 12:49
Konu: x25 address [7:1838]
> Hi guys,
>
> I have problem with my new network configuration, I designed a network
like
> this picture below :
>
>
> Device X25 ------------Cisco 3600----------FrameRelay---------------Cisco
> 7500-----------Device x25
> (MCX-1) | cloud
> | (MCX-2)
> |
> .|
> |
> .|
> HUB
> HUB
>
>
> I using Eigrp, and use x25 route to connect to another x25 device.
> TCP/IP can pass through to c7500 from c3600 but application that use x25
can
> not pass through MCX-2.
>
> MCX-1 address = 91251144
> C 3600 = 10.1.1.1
> C 7500 = 10.1.1.2
> Mcx-2 address = 90261144
>
> I use this command to execute x25 address.
>
> X25 ROUTE ^9026 IP 10.1.1.2
> X25 ROUTE ^9125 INTERFACE SERIAL0
>
> Thanks
> FAQ, list archives, and subscription info:
http://www.groupstudy.com/list/cisco.html
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=1847&t=1838
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
