Here is a note from the research I was doing on Queuing and I have an issue that has popped up from a design point. Note: A variety of queuing mechanisms can be configured using multilink, for example, Multichassis Multilink PPP (MMP). However, if only PPP is used on a tunneled interface - for example, virtual private dialup network (VPND), PPP over Ethernet (PPPoE), or PPP over Frame Relay (PPPoFR) no queuing can be configured on the virtual interface. We are designing a WAN that is going to use GRE tunnels over a PPP encapsulated T-1 Point to point link. I need to use Diffserv (RFC 2474 and 2475) (same selection criteria will be applied to all tunnel interfaces) to provide prioritzation of data. I have two questions: 1. Can it be done? 2. If so how? *******************Internet Email Confidentiality Footer******************* Privileged/Confidential Information may be contained in this message. If you are not the addressee indicated in this message (or responsible for delivery of the message to such person), you may not copy or deliver this message to anyone. In such case, you should destroy this message and kindly notify the sender by reply email. Please advise immediately if you or your employer does not consent to Internet email for messages of this kind. Opinions, conclusions and other information in this message that do not relate to the official business of my firm shall be understood as neither given nor endorsed by it. Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=1906&t=1906 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
