Post the configs for the serial ports at each end.
The following link is called "Troubleshooting Serial Line Problems". It may
not apply in your case; but is useful to have.
http://www.cisco.com/univercd/cc/td/doc/cisintwk/itg_v1/tr1915.htm

> -----Original Message-----
> From: Tariq [mailto:[EMAIL PROTECTED]]
> Sent: Wednesday, April 25, 2001 9:43 AM
> To: [EMAIL PROTECTED]
> Subject: RE: Serial Link is flapping [7:1793]
> 
> 
> Sh ip int shows me
> up up and than after few seconds it shows me up down
> 
> I am not doing anything, just trying to connect these routers 
> through back
> to back serial cable.
> 
> 
> Tariq
> 
> -----Original Message-----
> From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of
> Chuck Larrieu
> Sent: Tuesday, April 24, 2001 9:18 PM
> To: [EMAIL PROTECTED]
> Subject: RE: Serial Link is flapping [7:1793]
> 
> 
> Tariq, you don't get away so easily :->
> 
> When you say "flapping" what is the specific symptom? Sh ip 
> int brie shows
> up down? Down down?
> 
> Is it that you are losing routes?
> 
> Debug fram pack for frame relay links, debug ppp for ppp 
> links, debug hdlc
>  I think? Don't have a router handy. ) shows what?
> 
> You are sitting there minding your own business and the link 
> goes down, then
> comes back up? Or are you doing something, like reloading the 
> router, and
> the link appears up for a moment, then goes down?
> 
> In a situation where you are connecting routers back to back, 
> in general I
> have found that if a serial link is not operating properly, 
> it is a config
> problem. Knock on wood.
> 
> Chuck
> 
> -----Original Message-----
> From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]] On 
> Behalf Of
> Tariq
> Sent: Tuesday, April 24, 2001 6:03 PM
> To:   [EMAIL PROTECTED]
> Subject:      Serial Link is flapping [7:1793]
> 
> Hello Everybody.
> 
> In my home network, one link is continuously flapping.
> I changed the cable but no luck .......
> 
> I checked clock rate on DCE side and it was 64000.
> 
> Please help me to remove this problem
> 
> Tariq
> FAQ, list archives, and subscription info:
> http://www.groupstudy.com/list/cisco.html
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
> FAQ, list archives, and subscription info:
> http://www.groupstudy.com/list/cisco.html
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
> FAQ, list archives, and subscription info: 
> http://www.groupstudy.com/list/cisco.html
> Report misconduct 
> and Nondisclosure violations to [EMAIL PROTECTED]




Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=1885&t=1793
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]

Reply via email to