my layout looks kinda like this:
(Computer1)------e0(router1)s0------z-------s0(router2)e0------(Computer2)
router1/s0 is the DCE so i do:
config t
frame-relay switching
then on both i do
encapsulation frame-relay
frame-realy interface-dlci 17
frame-relay intf-type dXe
i then do debug frame-relay lmi and it shows that dce and dte are up but now
i can no longer ping from computer1 to computer2.
but as soon as i switch back to HDLC it all works fine.
the wierd thing is, when i have frame-relay turned on, i cant even ping
router1/s0's ip address from router1.
any ideas?
--
Justin M. Clark
MCSE 4.0, MCSE 2000
CCNA, CCDA
[EMAIL PROTECTED]
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=1986&t=1986
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
