Catalyst switches don't do layer 3 manipulation. You'd need to do this sort
of thing in the MFSC (router) module if your CAT6509 has one. You would
'session' into the module from the CLI of the switch if you had one. From
the MFSC, NAT is going to be identical to an IOS router, as that's what the
MFSC is.
--
Jason Roysdon, CCNP+Security/CCDP, MCSE, CNA, Network+, A+
List email: [EMAIL PROTECTED]
Homepage: http://jason.artoo.net/
""Thomas"" wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> Hi All - I wonder if NAT is support on set-base IOS? I am trying to use
> static NAT on the 6509. I could only define "ip nat inside" and "ip nat
> outside" on VLAN interfaces of the IOS card. Is there a way I can issue
the
> "ip nat inside" on the physical swith port of the 6509, just as I could
with
> router ethernet ports?? Thanks All.
> FAQ, list archives, and subscription info:
http://www.groupstudy.com/list/cisco.html
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=2384&t=2355
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
