Using the Feature Navigator (http://www.cisco.com/go/fn)
It says that IP Plus on the 4500 supports ISL from 11.3-6 (16/4)
to 12.1-7 (32/8)
But as John said, an FE for the 4500/4700 is expensive........
Kevin Wigle
----- Original Message -----
From: "John Hardman"
To:
Sent: Saturday, 28 April, 2001 13:18
Subject: Re: Cisco 4500 router [7:2378]
> Yes, with the right IOS image, an IP+ image should be enough, but check
the
> CCO to be sure.
>
> BTW, chances are pretty good you can get a 2620 or 2621 used for less than
> an used 4500/4700 with a NP-1FE.
>
> HTH
> --
> John Hardman CCNP MCSE
>
>
> ""William Harrison"" wrote in message
> [EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> > Just a quickie?
> >
> > Im looking for a inexpensive alternative to a 2621 that could support
ISL
> > trunking. Does the 4500 with 1-FE interface support ISL and router on
a
> > stick?
> >
> > Thanks
> > Bill Harrison
> > CCNA
> > FAQ, list archives, and subscription info:
> http://www.groupstudy.com/list/cisco.html
> > Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
> FAQ, list archives, and subscription info:
http://www.groupstudy.com/list/cisco.html
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=2400&t=2378
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
