The test covers the IOS of the 1900 series and the set-based interface of
the 5000 series--the IOS interface of the XL and 5000 is NOT covered.
And yes, there are some significant differences between the IOS of the 1900
and XL series, as you have found out.
Enjoy!
Richard
""Hunt Lee"" wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> I tried to practice some switching commands on the BCMSN book with my
> switch (2924XL), but I found I lot of commands is completely different
> from the BCMSN book.
>
>
> BCMSN My switch
>
> e.g.1. To assign ports to a VLAN: interface ethernet
> 0/1 interface ethernet 0/3
>
> vlan-membership static 3 switchport access vlan 3
>
> e.g.2 To enable PortFast spantree
> start-forwarding spantree portfast
>
>
> Is this because of the different IOS version? Or what do I have to do
> so that I can make my switch to use the same commands as the BCMSN
> book. Can anyone please shed some light on this?
>
> Regards,
> Hunt Lee
> IP Solution Analyst
> Cable and Wireless
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=2597&t=2477
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
