Hi Jason,
I'm working on a serial port set to async with DB60 to DB25 cable. I've done
them on console and aux, but struggling at the moment with serial
connection.
Regards,
Gaz
""Jason Roysdon"" wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> The problem is that the 1600 has no AUX port. Yes, you can get a modem to
> work on the CON port, the same as you could get it to work on a PIX CON
> port, but you have to make the modem do all the work. I'm not 100%
certain
> on this, but fairly certain. YMMV.
>
> --
> Jason Roysdon, CCNP+Security/CCDP, MCSE, CNA, Network+, A+
> List email: [EMAIL PROTECTED]
> Homepage: http://jason.artoo.net/
>
>
>
> ""Gareth Hinton"" wrote in message
> [EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> > Hi all,
> >
> > Just a quick one.
> >
> > Anyone connected a modem via RS232 cable to Serial interface of a 1600
for
> > dial in.
> > Mainly interested to see if it is possible.
> > At the moment is failing, seemingly at the authentication, but no debug
> for
> > this other than closing call.
> > Does 1600 have TTY capability.
> >
> > Thanks,
> >
> > Gaz
> > FAQ, list archives, and subscription info:
> http://www.groupstudy.com/list/cisco.html
> > Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
> FAQ, list archives, and subscription info:
http://www.groupstudy.com/list/cisco.html
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=2725&t=2592
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
