You more choices today than you did several months ago. But there are only 7
cards I can find in my configuration tool.
4 and 8 port ATM /IMA cards ( T1 and E1 models for each port count ) for
inverse multiplexing
one port T3 and one port E3 cards - the T3/DS3 would have the coax
connector. Don't know about E3
one port ATM 25 mbs card - my understanding is this one is used in LAN / ATM
LANE operations.
You may want to bookmark the following link to Cisco's public configuration
tool:
http://www.cisco.com/pcgi-bin/front.x/newConfig/config_root.pl
Chuck
-----Original Message-----
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]] On Behalf Of
Albert Lu
Sent: Thursday, May 03, 2001 7:44 AM
To: [EMAIL PROTECTED]
Subject: ATM Module for 2600 [7:3032]
Hi Group,
I would like to know if there was an ATM module for the 2600, specifically
to use for Lab study. I saw one on Cisco website, it looks like a BNC
connector so I'm not sure what's going on.
Thanks for your help =)
Albert
FAQ, list archives, and subscription info:
http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=3038&t=3032
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]