Neal,
Excellent news, thanks very much.
I'm on the kit at the moment (sat 5/5 11:35 GMT)
One problem, I can't configure the 4500 for ISL trunking as the 4500 is
connected to port 2/12 on the Cat which does not support trunking, is it
possible to connect the 4500 to port 1/1 or 1/2 on the Cat as these support
trunking.
BTW, as a suggestion I would put an addition to the term_serv config
under the various lines put the command
refuse-message ^z
The console session is currently in use.^z
Once done I will post my configs - i want to perfrom ISL trunking,
Spanning-tree parameter modification, static cam entry, snmp config, vtp
config, ip multicast config on routers and cat, system parameter config.
Cheers
Craig
"Neal Rauhauser" wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> There was nothing good on TV tonight so I assembled a fairly
> complete Catalyst lab for people to check out - its available at these
> addresses
>
>
> 24.3.233.101 2008 Catalyst 2926T
>
> 24.3.233.101 2007 Cisco 4500 /w Fast Ethernet
>
> 24.3.233.101 2006 Cisco 2610
>
> 24.3.233.101 2005 Cisco 3810
>
>
>
> I'm not going to give my usual full cabling description since
> anyone far enough along to play with this should understand how Cisco
> Discovery Protocol
> works - it is up to you to figure out what connects where. I also set
> the exec-timeout on the 2511 to five minutes - no more people idling for
> sixteen hours
> before I notice and clear the session.
>
>
> As always, play nice, no setting passwords, access lists, etc,
> so others can't get in, and if you dork it up email me at
> mailto:[EMAIL PROTECTED] so I can
> make sure its available.
>
>
>
> We also owe a big thank you to the guys at
> http://www.optimumdata.com who have kindly loaned us this 4500 with fast
> ethernet so this is a full lab instead
> of the catalyst only thing I put up yesterday. I had to move about a
> dozen new boxed cisco 2610s to get to the shelf where I found this 4500
> today and I counted
> about 75 25xx routers in the same area - I saw a lot of 2514s, 2521s,
> and I think a few 2523s - they have plenty of good stuff if you're
> trying to build your lab
> out.. I believe Michael Beacom ( mailto:[EMAIL PROTECTED] ) has
> been handling education sales since I left Optimum Data - you can reach
> him via
> their main number 800-879-8795.
> FAQ, list archives, and subscription info:
http://www.groupstudy.com/list/cisco.html
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=3302&t=3270
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
