check you console settings - should be 9600 baud, 8-bit data, no parity and
1 stop bit.
maybe try a different cable - you do have a flat black or light blue one
don't you?
Andy
----- Original Message -----
From: "Bruce Williams"
To:
Sent: Wednesday, May 09, 2001 9:54 PM
Subject: Problem with 3620 [7:3895]
> I have a 3620. It seems to power up okay, but I dont see anything on the
> screen and when I type I see nothing. I dont know if it is just not
booting
> up or if there is a problem with the console port. I tried to boot into
ROM
> monitor mode, but that was also unsuccessful.
>
> Bruce Williams
> [EMAIL PROTECTED]
> FAQ, list archives, and subscription info:
http://www.groupstudy.com/list/cisco.html
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=3924&t=3895
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
