I ran into this once, According to TAC, there are no show command to see
if a clp bit is set. This was as of 12.0.7. The "show atm interface atm
1/0" command shows a lot of good stuff but no clp bit.
Tony M.
#6172
----- Original Message -----
From: Cisco Newbie
To:
Sent: Wednesday, May 09, 2001 10:56 PM
Subject: ATM command to check CLP cell [7:3959]
> Hi Groupstudy,
>
> Like to check is there any command in Cisco IOS that allows me to check
> whether the cell I received has the Congestion Loss Priority (CLP) bit
set?
>
> If not how could I find out whether the cells is eligible to be discard
when
> there is a congestion....Thru' Telco?
>
>
> Definition of CLP: Congestion Loss Priority (CLP)---Indicates whether the
> cell should be discarded if it encounters extreme congestion as it moves
> through the network. If the CLP bit equals 1, the cell should be discarded
> in preference to cells with the CLP bit equal to zero.
>
>
> Thanx....
> _________________________________________________________________________
> Get Your Private, Free E-mail from MSN Hotmail at http://www.hotmail.com.
> FAQ, list archives, and subscription info:
http://www.groupstudy.com/list/cisco.html
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=3961&t=3959
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
