I entered your information into the search engine of the CCO & got this on
the first hit.
http://www-search.cisco.com/pcgi-bin/search/public.pl?q=Suspended-no-linkbea
t&num=10&searchselector=0
Answer: Suspended due to the absence of a linkbeat, ring, or ATM network.
This is usually because the attached station is disconnected or
powered-down. Port automatically returns to enabled state when the condition
causing the suspension is removed.
Phil
----- Original Message -----
From: Stuart Laubstein
To:
Sent: Thursday, May 10, 2001 5:58 AM
Subject: Cisco 2820 100 mb port problem [7:3971]
> I have a catalyst 2820 that I want to add to my lab but the 100 meg ports
> (b1-b8 ) do not work. The error I get when looking at port status is
> "Suspended-no-linkbeat" Does anyone know if this is a hardware problem or
> have I simply missed something?
>
> thanks
>
> stuart
> FAQ, list archives, and subscription info:
http://www.groupstudy.com/list/cisco.html
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=4001&t=3971
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
