PRI network side emulation has been available for a while. I am pretty sure you need an MFT interface. I have set this up several times on the NM-HDV voice modules which have an MFT in them. The choice of switch types to emulate is limited though. You can absolutely to a back to back PRI if you have the right hardware and feature set. I have only done it with MFT's using IP PLUS software and the 6608 T1 blade on the Cat 6509. BRI's would be a little different since they use a different line coding. I have only heard second hand that it can be done and have never tried it. I don't know if its just for a p to p type circuit or you can do actual ISDN switching and switch a call out different interfaces. That would be cool !! Tony M. #6172 ----- Original Message ----- From: Jason Roysdon To: Sent: Monday, May 14, 2001 2:50 AM Subject: Re: Is there any router that can be the network-side of BRI? [7:4387] > What interface, BRI? I did some searches through 12.2 references and do see > such a thing. It was my understanding that an ISDN switch isn't just as > simple as flipping DTE/DCE. > > Can you take a T1 CSU/DSU interface and connect it back to back to another > and run and T1 PRI (I've never tried and need to get some sleep, but > curious). I'm guessing you could and wondering what it would take to > connect this to a few BRIs in a lab environment. > > > -- > Jason Roysdon, CCNP+Security/CCDP, MCSE, CNA, Network+, A+ > List email: [EMAIL PROTECTED] > Homepage: http://jason.artoo.net/ > > > > ""Tony Medeiros"" wrote in message > [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... > > I here this feature is available in 12.2 Not sure which platforms but I > am > > pretty sure the 2600 and 3600 will support it. > > > > Tony M. > > #6172 > > ----- Original Message ----- > > From: RF > > To: > > Sent: Monday, May 14, 2001 12:06 AM > > Subject: Is there any router that can be the network-side of BRI? [7:4365] > > > > > > > Does anybody know of any router or router module/blade that can act as > the > > > network (telco) side of ISDN BRI? I know that in the latest IOS, you > can > > do > > > "isdn protocol-emulate network" for PRI, but what about BRI? > > > > > > Thanx > > > FAQ, list archives, and subscription info: > > http://www.groupstudy.com/list/cisco.html > > > Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] > > FAQ, list archives, and subscription info: > http://www.groupstudy.com/list/cisco.html > > Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] > FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html > Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=4411&t=4411 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
