hi,
we use SMDS extensivly and we have sub-interfaces created.
we have a 10 meg link going to a HSSI interface and have setup a config like
this
interface Hssi4/0
description 10Mbps SMDS Link
no ip address
encapsulation smds
ip ospf network broadcast
ip ospf hello-interval 30
ip ospf priority 5
bandwidth 10000
no keepalive
smds enable-arp
ntp broadcast
!
interface Hssi4/0.1 multipoint
description *****
ip address 10.*.*.* 255.*.*.*
ip ospf network broadcast
ip ospf hello-interval 30
ip ospf priority 10
arp timeout 0
smds address c449.*.*.*
smds multicast IP e449.*.*.* 10.*.*.* 255.*.*.*
smds enable-arp
ntp broadcast
i hope this help`s
steve
>From: "Richie, Nathan"
>Reply-To: "Richie, Nathan"
>To: [EMAIL PROTECTED]
>Subject: SMDS Question [7:4437]
>Date: Mon, 14 May 2001 14:13:24 -0400
>
>With an SMDS connection to 2 remote sites and to the Internet, all 4
>routers
>(corporate, remote A, remote B, & ISP router). Currently all of the SMDS
>interfaces are on the same subnet. Can I create sub-interfaces on the SMDS
>interfaces and put the connections between remote sites and the corporate
>site on separate networks? (I am not too familiar with SMDS)
>
>Thanks,
>
>Nathan
>FAQ, list archives, and subscription info:
>http://www.groupstudy.com/list/cisco.html
>Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
_________________________________________________________________________
Get Your Private, Free E-mail from MSN Hotmail at http://www.hotmail.com.
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=4511&t=4437
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
