Hi Swapnil,
Yes! That's what MRTG is doing.... it will update the graph every 5
minutes, using a cron.
Regards,
Cheeyong
At 08:26 AM 5/16/01 +0530, [EMAIL PROTECTED] wrote:
>Is there any option in MRTG where I can get only the operational status
>and show it up on some graph which refreshes every five minutes( i mean
>only oper status)
>
>REgards
>Swapnil
>
> > Hi,
> >
> > You might want to try MRTG.
> > http://www.mrtg.org
> >
> > Regards,
> > Cheeyong
> >
> > At 10:45 PM 5/15/01 -0400, [EMAIL PROTECTED] wrote:
> > >Dear All
> > >
> > >I have a bit of a problem.
> > >I have to monitor one frame-relay n/w.
> > >It is having hub & spoke topology. Now my problem is i only have IP
> > >connectivity to the hub and have SNMP read access for that router .
> > >Spoke PVC's are configured using sub-interfaces.I can not ping
> > spokesusing
> > >my ip connectivity.
> > >So the only option remains is gain access to the router through SNMP
> > and get
> > >the sub-interface status.
> > >
> > >Can any one help by suggesting which snmp tool will be able to give
> > the
> > >status to me on periodic basis.
> > >
> > >Pls help me out ...
> > >Thanks.
> > >
> > >Regards,
> > >Swapnil
> > >FAQ, list archives, and subscription info:
> > >http://www.groupstudy.com/list/cisco.html
> > >Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
> >
> >
>
>Regards,
>Swapnil
>Central N/W Management Group
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=4639&t=4634
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
