Hi all: Consider this situation. Let's say I have a router (call it router A) with 4 serial interfaces, each connected to a T1 line. This router is connected to 2 other routers by these serial interfaces, such that S0 and S1 are connected to router B, and S2 and S3 are connected to router C. So on router A I want to be able to create 2 multilink PPP bundles of 2 serial interfaces each. Can I do this? Note, I do not want all interfaces in 1 bundle, I want 2 entirely different bundles. Also, there is no dialing going on anywhere, so I do not think you can use any Dialer interfaces (I tried with both dialer pools and rotary groups, and got nowhere, as if I don't add a dialer string, then debug's complain about no dialer string, and then when I do add a bogus dialer string, the serial interface still refuses to bind to the dialer interface). If this is possible, what are the commands? Yes, I've thought about using virtual-templates. But then, I don't see any command (in 12.0) to link a particular bundle with a particular virtual-template. And I've already explored the Dialer commands, to no avail. Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=4827&t=4827 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
