1. check the interface counters (errors, late collisions, etc.) to see
whether the cable is at fault. If not then have a look at the routers to
see why they might be dropping packets.
2. from configure prompt:
interface vlan X
ip address
exit
ip default-gateway
end
if you wish to use a vlan other than vlan 1 as the management interface you
need to add the command "management" under the interface config. Note that
you *cannot* have more than one management interface live, although you can
have the config there for multiple.
check:
http://www.cisco.com/univercd/cc/td/doc/product/lan/c2900xl/29_35wc/sc/index
.htm
hth
Andy
----- Original Message -----
From:
To:
Sent: Wednesday, May 16, 2001 5:41 PM
Subject: 2912XL switch [7:4704]
> thanks brian
>
> can u please look into secon part of my question
>
> >
> > 100m is the max for fe, is there possibly a mismatch for speed or
duplex?
> > Got Fluke??
> >
> > Bri
> >
> > ----- Original Message -----
> > From: "Jim Barksdale"
> > To:
> > Sent: Tuesday, May 15, 2001 1:15 PM
> > Subject: Re: cross cable length [7:4561]
> >
> >
> > > If you made the cable yourself...
> > > Make sure you used the correct pairs (colors) on the correct pins.
> > > Short cables it does not make much difference, longer cables it does.
> > >
> > >
> > > "[EMAIL PROTECTED]" wrote:
> > >
> > > > hi group
> > > >
> > > > my 1st mail to group , joined a month back has helped me alot
> > > > i thank all of you.
> > > >
> > > > i have a doubt please help me to sort it out.
> > > >
> > > > point no. 1
> > > >
> > > > i am working in an ISP, one of our client is conected from our
> > fastethernet
> > > > port to his router over cross cable(total cable length is 60 meter
both
> > > > routers r 3600 series). customer is experincing packet loss, someone
> > said
> > > > that for cross cable length cant me more that 15-20 Meter. But i
have
> > never
> > > > come across such thing in any book. all books say that for 100Base T
> > length
> > > > is 100M.
> > > >
> > > > point no. 2
> > > >
> > > > we have 2912XL switch, to see ip address/subnet mask/default gateway
> > what
> > > is
> > > > command. in case of 1900 series it is
> > > > sh ip. i tried searching on cisco site but could not locate it.
> > > >
> > > > looking for u alls support
> > > >
> > > > thanks
> > > >
> > > > manoj
> > > >
> > > > ______________________________________________________
> > > > 123India.com - India's Premier Portal
> > > > Get your Free Email Account at http://www.123india.com
> > > > FAQ, list archives, and subscription info:
> > > http://www.groupstudy.com/list/cisco.html
> > > > Report misconduct and Nondisclosure violations to
[EMAIL PROTECTED]
> > > FAQ, list archives, and subscription info:
> > http://www.groupstudy.com/list/cisco.html
> > > Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
> > FAQ, list archives, and subscription info:
> http://www.groupstudy.com/list/cisco.html
> > Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
>
>
> ______________________________________________________
> 123India.com - India's Premier Portal
> Get your Free Email Account at http://www.123india.com
> FAQ, list archives, and subscription info:
http://www.groupstudy.com/list/cisco.html
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=4851&t=4704
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
