On Fri, May 18, 2001 at 04:56:29AM -0400, Rashid Lohiya wrote:
> Hi all,
>
> I am trying to setup an E1 connection back-to-back, Cisco 7200 - Cisco
2600.
> I wish to know which card to buy for the 2600 Router, that will give me 2MB
> on RJ45 Presentation.
>
> I have a card MultiChannel E1/PRI 120 OHM/RJ45 on the 7200 end, (does
anyone
> have a part no. for this?).
>
> Do I now need a:
>
> NM-CE1U - 1-port Channelized E1/ISDN-PRI balanced network module?
^
its unbalanced
> or a
> NM-CE1B - 1-port Channelized E1/ISDN-PRI balanced network module?
> or
> is there something that gives E1 with CSU that I need, or maybe something
> else altogether to fit into the 2600 router.
>
> Also do I need a crossover cable or will a normal Cat5 RJ45/UTP cable do.
>
> Thanks
>
> Rashid Lohiya
> [EMAIL PROTECTED]
> 020 8509 2990
> 03775 362626
> www.pioneer-computers.com
> FAQ, list archives, and subscription info:
http://www.groupstudy.com/list/cisco.html
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
You need NM-CE1B - 1-port Channelized E1/ISDN-PRI balanced network module
whith Cat5 RJ45/UTP
^^^^^^^^
Bye thanks.
--
<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<
_ ___
_| / __| Tiziano Sassatelli - IP Network Engineer
/ . \__ \ DS Logics Srl - A Cable & Wireless Company
\___,___/ NET Via Paolo Nanni Costa 30 Bologna (Italy)
Email: [EMAIL PROTECTED] http://www.cw.com/it Phone:
+39-051-6583011
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=4961&t=4958
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
