All Good Guys in CISCO has been laid off.... All the Best to u guys !! --- Kiran Kumar M wrote: > Hi, > > I have Cisco 3640 with three 16 modems Network > Modules. My problem with > this box is > > Not able to connect at first time. After negotiation > (Handshaking) it > is disconnecting the user, if I try with the same > userid and password it > is connecting. > > I raised the case to TAC, but not successful to > solve the problem. They > asked for search protecters, and separate earthing > for router. We did it, > but the problem is not solved. Here is the > configuration that I am using > at my router end... > > > .................... > .................... > > aaa new-model > aaa authentication login default group radius enable > aaa authentication login root local > aaa authentication ppp default group radius > aaa accounting network default start-stop group > radius > > ................ > ................ > > modem country microcom_hdms india > ................. > ................. > chat-script rst "" "AT&FS0=1" OK > ................. > ................. > interface Group-Async1 > ip unnumbered Ethernet0/0 > no ip directed-broadcast > encapsulation ppp > ip tcp header-compression passive > autodetect encapsulation ppp > async mode dedicated > peer default ip address pool setup_pool > no cdp enable > ppp authentication pap > group-range 33 48 > ! > interface Group-Async2 > ip unnumbered Ethernet0/0 > no ip directed-broadcast > encapsulation ppp > ip tcp header-compression passive > autodetect encapsulation ppp > async mode dedicated > peer default ip address pool setup_pool > no cdp enable > ppp authentication pap > group-range 65 80 > ! > interface Group-Async3 > ip unnumbered Ethernet0/0 > no ip directed-broadcast > encapsulation ppp > ip tcp header-compression passive > autodetect encapsulation ppp > async mode dedicated > peer default ip address pool setup_pool > no cdp enable > ppp authentication pap > group-range 97 112 > ....................... > ....................... > ip local pool setup_pool xxx.xxx.xxx.xxx > xxx.xxx.xxx.xxx > ip classless > ........................ > ........................ > radius-server configure-nas > radius-server host xxx.xxx.xxx.xxx auth-port 1645 > acct-port 1646 > radius-server key XXXXXXXX > > For authentication I am using the cistron radius. > > Can anyone help me to solve this problem... > > Regards, > Kiran > FAQ, list archives, and subscription info: > http://www.groupstudy.com/list/cisco.html > Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] _____________________________________________________________________________ http://messenger.yahoo.com.au - Yahoo! Messenger - Voice chat, mail alerts, stock quotes and favourite news and lots more! Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=5049&t=5049 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
