How about this?:
access-list 100 permit ip any 1.1.1.0 0.0.0.255
priority-list 1 protocol ip high list 100
Then on the interface do a priority-group 1
At 03:32 AM 5/21/01, you wrote:
>Hi folks,
>I like to setup a policy so that any traffic destined to 1.1.1.0/24 will
>take precedence over the rest. My outbound link is a single T1. Please
>throw me a short sample config. Thanks for helping.
>
>-Frank
>FAQ, list archives, and subscription info:
>http://www.groupstudy.com/list/cisco.html
>Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=5232&t=5227
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
