Cat5505 with LANE module (A & B PHY), 1 x 24 port module, 2 x 12 port
module, SUP II.
There's a Hitachi ATM switch pre-configured with 3 ELAN (eg: demo1, demo2,
demo3)
with only 1 ATM server address given which we can't play around with.
My attempt:
a) Configure 3 VLAN (10.1.1.1, 10.1.2.1, 10.1.3.1) in Cat5505 with 1 VTP
domain (transparent). Then
assign VLAN 1 to 3/1-12, VLAN 2 to 4/1-12 and VLAN 3 to 5/1-24.
b) Configure 3 ELAN as assigned by the Hitachi ATM switch into Cat5505 ATM
module with
the server atm address.
c) Create 3 database for different ELAN.
d) Configure 3 sub-interface for 3 different ELAN bind to the VLAN number
Result:
'show lane'
no global LECS addresses exist
cumulative total number of unrecognized packets received so far: 0
cumulative total number of config requests received so far: 0
cumulative total number of config failures so far: 0
Question:
When I attach physically a laptop to VLAN 2 and assign an IP to it as
10.1.2.10, it could not ping
to another destination behind the Hitachi switch. Thought the ELAN (when
bind to VLAN2) would
forward the udp traffic to another switch.
Your comments is highly appreciated.
Ryan
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=5367&t=5367
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
