Use the debug ip mpacket EXEC command to display IP multicast packets
received and transmitted.
Try debug ip packet, I am not sure you have configure multicasting in your
router or not.
I do not know you configure any routing routing protocol, but not all
rotuing protocol use
mutlicastingl.
It is just my little opinion.
HTH
Vincent Chong
""Washington Rico"" Debug mpacket produces no output to terminal. Packets
are flowing though
> the router and router seems to be working fine, but no out is produced
from
> any debug.
>
> Flex-Rtr-2#ter mon
> Flex-Rtr-2#debug ip mpacket
> IP multicast packets debugging is on
> Flex-Rtr-2#
>
> No output is being produced to console or telnet session..
>
> Anyone have any ideas??
> _________________________________________________________________________
> Get Your Private, Free E-mail from MSN Hotmail at http://www.hotmail.com.
> FAQ, list archives, and subscription info:
http://www.groupstudy.com/list/cisco.html
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=5395&t=5394
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
