Yes i tried different cables ......at it seems i have seen this problem on
3com 3300 series switch..also with different location different cable and
different n/w cards
Regards
""Andras Bellak"" wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> Have you tried any other network cables - sounds like a distance issue,
but
> could also easily be a bad cable.
>
> andras
>
> -----Original Message-----
> From: Arun [mailto:[EMAIL PROTECTED]]
> Sent: Monday, May 21, 2001 10:12 PM
> To: [EMAIL PROTECTED]
> Subject: Regarding negotiations [7:5380]
>
>
> Hi
> I have catalyst 5000 series switch ....
> the problem is when i connect a laptop or pc to it with a small length
cable
> say 10-20 feet ..i can talk to it with my settings of duplex as
auto-select
> and speed as auto-select both the settings are of network card i am using
> ....( i am using xircom pc card and 3com pc card for the laptops )
> but when the length is increased say 50-70 feet i cann't talk to it
anymore
> and it shows blinking lights on the switch side which i think it means
> negotiations problem....so i set my laptop or pc to duplex full and speed
to
> 10mbps then i am only able to talk to it .....no other mode is working
> ..both this settings are on the workstations side .
> Can anyone explain what the problem is or what is wrong somewhere .
>
> Regards
>
> Arun Sharma
> FAQ, list archives, and subscription info:
> http://www.groupstudy.com/list/cisco.html
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
> FAQ, list archives, and subscription info:
http://www.groupstudy.com/list/cisco.html
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=5407&t=5380
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
