On Tue, 22 May 2001, Kelly D Griffin wrote:
> I have configured a 2500 as a tftp server and have it connected via a WAN
> link in my lab to another 2500. I can ping across the circuit in both
> directions, but when I attempt a tftp transfer I get this:
>
> R2#copy tftp flash
> **** NOTICE ****
> Flash load helper v1.0
> This process will accept the copy options and then terminate
> the current system image to use the ROM based image for the copy.
> Routing functionality will not be available during that time.
(snip rest of session)
> I can ping across the circuit from the tftp server router while the
timeouts
> are occurring. The 1.1.1.1 address is the address of Loopback0 on R1. I
am
> running EIGRP for routing and do not have a default route statement in
> either router.
>
> Any ideas?
Yes. Pay attention to the last line I left of the notice above. :-) If
from R1 (which I assume is the TFTP server) you did an extended ping
using lo0 as the source interface, it would also fail.
--
"Someone approached me and asked me to teach a javascript course. I was
about to decline, saying that my complete ignorance of the subject made
me unsuitable, then I thought again, that maybe it doesn't, as driving
people away from it is a desirable outcome." --Me
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=5455&t=5426
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
