Assuming - you realize and could recover from locked console :
there is global config command (hidden) from 11.3 onwards :
aaa authentication console
It will apply "default" list or other list specificed on "line" to the
console.
HTH
GS
""Andras Bellak"" wrote in message
news:[EMAIL PROTECTED]...
> The newer versions allow it, but the setup is different - you need to
setup
> a list of tacacs servers/parameters (not sure of the makeup off the top of
> my head) and then apply that list to your line con 0.
>
> The cisco page that discusses with examples is at cisco.com +
> univercd/cc/td/doc/product/software/ios120/12supdoc/dsqcg3/qcsecur.htm
>
> good luck
>
> andras
> -----Original Message-----
> From: Marakalas [mailto:[EMAIL PROTECTED]]
> Sent: Tuesday, May 22, 2001 1:31 AM
> To: [EMAIL PROTECTED]
> Subject: Controlling console access via tacacs+ [7:5400]
>
>
> Hi all
>
> I have tacacs loaded on all our routers in our network and would like
> to configure the console ports to use it also, not only the vty lines.
> I noticed that on IOS ver 10.x, you could actually configure 'login
> tacacs' on the console port, but can't do it on the new version of the
> IOS. Any assistance will be highly appreciated.
> _______________________________________________________________
> http://www.webmail.co.za the South-African free email service
> FAQ, list archives, and subscription info:
> http://www.groupstudy.com/list/cisco.html
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
> FAQ, list archives, and subscription info:
http://www.groupstudy.com/list/cisco.html
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=5491&t=5400
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
