ahhh, troubleshooting!
Win95 --- 2501-1 ------ 2501-2 ---- Win98
Eth serial Eth
First, is that the configuration?
Second, are you pinging from 2501-1?
If so, then do you have IP addresses on the serial interfaces of 2501-1 and
2501-2?
If so, are they in the same subnet with the same mask? (are the interfaces
showing up/up)? If not, then fix
If so, do you have a route to the network represented by eth0 of 2501-2? If
not, then fix
If so, does the Win98 PC have the ip address of 2501-2 eth0 as its default
gateway?
the joys of troubleshooting!
-e-
----- Original Message -----
From: "Fanglo MA"
To:
Sent: Tuesday, May 22, 2001 9:51 PM
Subject: Re: TCP/IP host config [7:5508]
> Please check all your route tables. You should get the answer.
>
> HTH
> Fanglo
>
> ""Stephen Flint"" wrote in message
> [EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> > Hi,
> >
> > Let me be more specific.
> >
> > I have two 2501s and a host for each one. I can ping in one direction
to
> a
> > host(Win95) but in the other direction to the second host(Win98),
> > it cannot be pinged or telnetted. Any help would be appreciated.
> >
> > Thanks,
> > Stephen Flint
> > [EMAIL PROTECTED]
> >
> > _________________________________________________________________
> > Get your FREE download of MSN Explorer at http://explorer.msn.com
> > FAQ, list archives, and subscription info:
> http://www.groupstudy.com/list/cisco.html
> > Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
> FAQ, list archives, and subscription info:
http://www.groupstudy.com/list/cisco.html
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=5533&t=5508
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]