You can do that easily. I am serving 50 Vlans with one DHCP server. Use the Ip helper command on your interface to point to the DHCP server and configure all the scopes on the DHCP server and it will work fine. Regards, Anan -----Original Message----- From: Pras oty [mailto:[EMAIL PROTECTED]] Sent: Wed, May 23, 2001 9:13 AM To: [EMAIL PROTECTED] Subject: RE: How do I set up Windows DHCP for multiple VLANS? [7:5490] i'm supporting w2k network with 3 vlan once i have my dhcp server down in one of the vlan, and the clients still can get addresses from dhcp server on another vlan. means it is possible to serve multiple vlan with 1 dhcp server. please correct me if i am wrong. FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=5542&t=5490 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
