Sure. I have one with two NP-2Ts and one NP-1E acting as a frame-relay
switch and all of the serial interfaces are configured as DCE.
Kelly D Griffin, CCNA, CCDA
Network Engineer
Kg2 Network Design
877.418.4025
http://www.kg2.com
----- Original Message -----
From: "Tim Medley"
To:
Sent: Wednesday, May 23, 2001 12:30 PM
Subject: Can an NP-2T serial module do DCE? [7:5594]
> I have a 4000 router with a NP-2T 2port serial module (the big V2 50 pin
> connectors) I was thinking that this module cannot do DCE, only DTE.
> Today I noticed a DCE light on the back of the serial module.
>
> Can this module do DCE?
>
> tim medley
> network architect
> iReadyWorld VoIP Group
> FAQ, list archives, and subscription info:
http://www.groupstudy.com/list/cisco.html
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
> ____________________________________________
> http://1cis.com
> Free E-mail Servers with unlimited mailboxes
> 1st Class Internet Solutions
____________________________________________
http://1cis.com
Free E-mail Servers with unlimited mailboxes
1st Class Internet Solutions
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=5596&t=5594
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
