Here's the config from my 2511, hope that helps:
Terminal#
Terminal#
Terminal#s run
Building configuration...
Current configuration:
!
version 11.2
service password-encryption
no service udp-small-servers
no service tcp-small-servers
!
hostname Terminal
!
enable password 7 xxx
!
no ip domain-lookup
ip host r1 2001 1.1.1.1
ip host r2 2002 1.1.1.1
ip host r3 2003 1.1.1.1
ip host r4 2004 1.1.1.1
ip host r5 2005 1.1.1.1
ip host r6 2006 1.1.1.1
ip host r7 2007 1.1.1.1
ip host r8 2008 1.1.1.1
ip host r9 2009 1.1.1.1
ip host r10 2010 1.1.1.1
ip host r11 2011 1.1.1.1
ip host r12 2012 1.1.1.1
ip host r13 2013 1.1.1.1
ip host r14 2014 1.1.1.1
ip host r15 2015 1.1.1.1
ip host r16 2016 1.1.1.1
!
interface Loopback0
ip address 1.1.1.1 255.255.255.255
!
interface Ethernet0
ip address 10.10.30.15 255.255.255.0
!
interface Serial0
no ip address
shutdown
!
interface Serial1
no ip address
shutdown
!
no ip classless
ip route 10.0.0.0 255.0.0.0 10.10.30.254
!
alias exec co config t
!
line con 0
line 1 16
transport input all
line aux 0
line vty 0 4
password 7 xxx
login
!
end
Terminal#
Terminal#
>From: "Anthony"
>Reply-To: "Anthony"
>To: [EMAIL PROTECTED]
>Subject: reverse telnet [7:5644]
>Date: Wed, 23 May 2001 19:34:38 -0400
>
>I am trying to set up reverse telnet. Doesn't seem to be working. what
>are
>the steps involved?
>
>Thanks
>FAQ, list archives, and subscription info:
>http://www.groupstudy.com/list/cisco.html
>Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
_________________________________________________________________
Get your FREE download of MSN Explorer at http://explorer.msn.com
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=5652&t=5644
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
