Thanks Brad. That worked. For those like me that happen to fall into this
problem, here's how to recover. On the Olicom is two reset buttons. The top
one can be used to reset the switch. Press hard and keep it pressed for a
few seconds, after which a menu will appear to allow you to download
software via the serial cable. It is very slow but it can be done! Switch
is now up and running 4.1(3) code!
""Brad Ellis"" wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> Try a later version of code. 4.1(3) should work. We have been loading
that
> version of code on the Olicom's we've been selling.
>
> -Brad Ellis
> CCIE#5796
> [EMAIL PROTECTED]
> Cisco gear: www.optsys.net
>
> ""goroupstudy.com"" wrote in message
> [EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> > Hello All -
> >
> > I just downloaded the Cat 3920 code 3.0(7) to an Olicom 8600. Now it
gives
> > me a message which says:
> >
> > FATAL SYSTEM ERROR: Unknown System Board ID
> >
> > It was my understanding (based on what I heard here) that this switch is
> Cat
> > 3920 compatible. Anyone know a) how to break in/recover from this mess
> > and/or b) what is a good image to use for the box?
> >
> > Im totally hosed, so any help is appreciated!
> > FAQ, list archives, and subscription info:
> http://www.groupstudy.com/list/cisco.html
> > Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
> FAQ, list archives, and subscription info:
http://www.groupstudy.com/list/cisco.html
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=5855&t=5815
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
