> My machine (on site A) is 200.200.62.70 / 255.255.255.240 with gateway
> 255.255.255.65.
Do you mean 200.200.62.65 there? As stated here, A's default gateway
isn't on the same subnet as A. Won't work.
> * site A:
> ip route 200.200.46.208 255.255.255.240 tunnel0
> * Site B:
> ip route 200.200.62.64 255.255.255.240 tunnel0
Did you try
ip route 200.200.46.208 255.255.255.240 192.168.1.2
and
ip route 200.200.62.64 255.255.255.240 192.168.1.1
instead?
Did you try using traceroute instead of ping to see where you get stuck?
Did you make sure that the tunnel interface is up and running on both
routers? Di you try pinging from router A (using extended ping and
different source interfaces) to see whether the problem was on the
router or the host?
On Fri, 25 May 2001, Eduardo D Piovesam wrote:
> Hello,
>
> First, apologies for this long mail.
>
> I'm beggining with "cisco routers", and my "first" problem is with tunnels.
>
> I'm trying to set up a tunnel between our two locations with no success.
>
> These sites are linkeds to a ISP backbone.
>
> The "transport/passenger" protocols are IP. The routers are Cisco 2501 IOS
> 12.0(6).
>
> Addresses:
> - Site A LAN address : 200.200.62.64 / 255.255.255.240
> - Site B LAN address : 200.200.46.208 / 255.255.255.240
>
> * site A:
> -------------
> interface Tunnel0
> ip address 192.168.1.1 255.255.255.252
> no ip directed-broadcast
> tunnel source XXX.YYY.230.234 -- serial0
> tunnel destination XXX.YYY.49.238 -- serial0 on router on site B
> !
> interface Ethernet0
> ip address 200.200.62.65 255.255.255.248
> no ip directed-broadcast
> no ip route-cache
> no ip mroute-cache
> !
> interface Serial0
> ip address XXX.YYY.230.234 255.255.255.252
> no ip directed-broadcast
> encapsulation frame-relay
> no ip route-cache
> no ip mroute-cache
> no fair-queue
> !
> ip classless
> ip route 0.0.0.0 0.0.0.0 XXX.YYY.230.233 -- serial port on ISP router
> ip route 200.200.46.208 255.255.255.240 tunnel0
> !
> -------------
>
> * Site B:
> -------------
> !
> interface Tunnel0
> ip address 192.168.1.2 255.255.255.252
> no ip directed-broadcast
> tunnel source XXX.YYY.49.238 -- serial0
> tunnel destination XXX.YYY.230.234 -- serial0 on router on site A
> !
> interface Ethernet0
> ip address 200.200.46.209 255.255.255.248
> no ip directed-broadcast
> no ip route-cache
> no ip mroute-cache
> !
> interface Serial0
> ip address XXX.YYY.49.238 255.255.255.252
> no ip directed-broadcast
> encapsulation frame-relay
> no ip route-cache
> no ip mroute-cache
> !
> ip classless
> ip route 0.0.0.0 0.0.0.0 XXX.YYY.49.237 -- serial port on ISP router
> ip route 200.200.62.64 255.255.255.240 tunnel0
> !
> -------------
>
> My machine (on site A) is 200.200.62.70 / 255.255.255.240 with gateway
> 255.255.255.65.
>
> If I try to ping 200.200.46.209 with the tunnel on routers, I get "Request
> timed out". If I remove the 2nd routes from both routers, I can ping
> 200.200.46.209... :(
>
> Where I wrong?
>
> Thank you for any hint, clue, help...anything.
>
> Regards,
> Eduardo
> FAQ, list archives, and subscription info:
http://www.groupstudy.com/list/cisco.html
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
>
--
"Someone approached me and asked me to teach a javascript course. I was
about to decline, saying that my complete ignorance of the subject made
me unsuitable, then I thought again, that maybe it doesn't, as driving
people away from it is a desirable outcome." --Me
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=5958&t=5945
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
