I believe you're referring to a dialer profiles, using a dialer interface
instead of legacy.
http://www.cisco.com/warp/public/793/access_dial/ddr_dialer_profile.html
Phil
----- Original Message -----
From: Akin Durosinmi-Etti
To:
Sent: Saturday, May 26, 2001 12:38 PM
Subject: Remote Access [7:6034]
> Hi Guys,
>
> What command line do I use to configure my router to receive multiple
> remote connections. I use ISDN line, I have already configured DOD, and
> its working fine.
> Please assist...........
>
> Regards,
> Akin Durosinmi-Etti. HND, MCSE, CCNA
> Cisco Specialist
> Techno Zone Limited
> WoodGreen, London.
> Phone: +44 (0)20 8881 6729
> Fax: +44 (0)20 8881 6705
> Mobile: +44 (0)7958 294 720
> E-mail: [EMAIL PROTECTED]
>
>
>
****************************************************************************
**********
> This message may contain information proprietary to Techno Zone Limited so
> any
> unauthorised disclosure, copying or distribution of its contents is
strictly
> prohibited.
>
****************************************************************************
**********
> FAQ, list archives, and subscription info:
http://www.groupstudy.com/list/cisco.html
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=6036&t=6034
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
