If I understand you correctly, the problem is with your NAT statements on
the router.
Make sure you are doing inside destination translation. You mave to have use
static mappings (one to one) since you want reach a box inside your network.
If you need more help post your config. Somebody will give you a hand.
KD
""Gunjan Mathur"" wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> Hi,
>
> I'm trying to implement NAT on my router first time.
> My problem is that I want to change one of my server
> IP but some remote applications are using current IP,
> so i have to route the traffic to new IP.
>
> when I try to ping my nated server then ping does not
> reply back but same time traceroute return the reply
> till router itself, but my destination m/c the new ip
> dose not appear in this traceroute. when i try this
> from router then it reaches to new IP(destination m/c)
> but ping still fails.
> And when I try my service then it also fails.
> What could be the reason of this and how I can solve
> this or from where I can get the sample conf. of this
> type of application. I also check the cisco site and
> not get solved.
>
> Bye
>
> __________________________________________________
> Do You Yahoo!?
> Yahoo! Auctions - buy the things you want at great prices
> http://auctions.yahoo.com/
> FAQ, list archives, and subscription info:
http://www.groupstudy.com/list/cisco.html
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=6127&t=6107
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
