I am not sure if 4.44 showed the activation key in show ver.
I don't think the Pix will run if it didn't have an activation key.
----- Original Message -----
From: "Jtnatas Amorim"
To:
Sent: Friday, May 25, 2001 4:32 PM
Subject: PIX FIREWALL UPGRADE [7:5976]
> I'd be grateful if someone could help me solve this problem:
>
> I have a PIX 520 in a customer network with the following show version
> command results:
>
> pix# sh versh har
>
> PIX Version 4.4(4)
>
> Compiled on Thu 06-Jan-00 16:07 by pixbuild
>
> pix up 2 days 3 hours
>
> Hardware: SE440BX2, 128 MB RAM, CPU Pentium II 349 MHz
>
> Flash strata @ base 0x300
>
> 0: ethernet0: address is 00d0.b785.4f86, irq 11
>
> 1: ethernet1: address is 00d0.b783.e78a, irq 10
>
> Licensed Connections: 128
>
> Serial Number: 18029118
>
>
>
> Please I'd like to know if in the case of a PIX software upgrade from a
> 4.4(4) to a 5.2(1) version, I will need a activation Key.
>
> Note: As you can see with the show version command, actually the device
does
> not have a activation key.
>
> Thank in advance,
>
> _________________________________________________________________________
> Get Your Private, Free E-mail from MSN Hotmail at http://www.hotmail.com.
> FAQ, list archives, and subscription info:
http://www.groupstudy.com/list/cisco.html
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=6213&t=5976
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
