Questions on configuring the Pix Firewall 515.
1
I have an internal network that is using nat 1 on the inside interface
to access the internet. My understanding of the pix is you have to nat your
addresses in order for the pix to protect them. Should I use Nat 0 to
protect my external or public address and if so how should I set it up.
2
I have a machine on the internal network that needs to be accessed from
the outside. I have static mapped the internal address to a public address
and set up a conduit for the address also. Isn't that the solution or am I
forgetting something. I still can not access the unit.
Please advise I am lost
If you have any advice please let me know.
Scott
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=6301&t=6301
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]