Are you trying to manage the 2924 from the new VLAN? If so, you have to shut
down VLAN 1. then you can no-shut the new VLAN.
..........................................
Mike Bernhardt
CCIE #6079
To reply directly, yo know what to do...
khramov wrote:
>
> Trying to set up a VLAN between 5505 with the RSM module and
> 2924 Cisco
> Catalyst Switch over 100baseFX. Everything seems to be working
> correctly except the VLAN on the 2924 shows shut down and can
> not be
> brought up.
> On 5505 we created VLAN, assign an IP address to the VLAN on
> 5505 and on
> the VLAN 2924. We left the VLAN 1 on the 2924 with no IP
> address.
> We also enabled EIGRP routing on RSM module on 5505.
> Any suggestions on what we need to do to make them talk over
> the VLAN.
>
>
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=6477&t=6475
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]