How about attaching a break-out box and connecting an oscilloscope to the
clocking signal.
Chances are I'm not being too helpful here am I?
Would be handy if Cisco boxes could report on the actual clocking speed.
Anybody know why this isn't already a feature?
Gaz
""STRAND Scott"" wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> Guy,
> You're right, it is an external CSU/DSU that is in a remote location.
> Thanks for the help.
>
> Scott
>
> "Lupi, Guy" wrote:
>
> > I assume that this is a serial interface with no integrated CSU/DSU, and
in
> > that case the only way that I know of to tell the speed is to look at
the
> > external CSU/DSU and find out how many timeslots are configured. Hope
this
> > helps.
> >
> > Guy
> >
> > -----Original Message-----
> > From: STRAND Scott [mailto:[EMAIL PROTECTED]]
> > Sent: Thursday, May 31, 2001 3:07 PM
> > To: [EMAIL PROTECTED]
> > Subject: Speed of a serial interface [7:6645]
> >
> > How do you tell the actual speed of a serial interface. I know it is not
> the
> > BW command and there is no clock rate set. Is there a
> > command?
> >
> > Thanks,
> > Scott
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=6730&t=6645
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
