Hi, we are running ADSL at our ROBO around the US, we also use a VPN to get them back to HQ. I will include a config that might help. This is a 2621 router Thank you, Rob Mears III, CCNA, MSCE, CNE, NNCDS, NNCSS, A+ Technical Mercenary Valor Telecom ************************************** version 12.1 no service single-slot-reload-enable service timestamps debug uptime service timestamps log uptime no service password-encryption ! hostname Amardsl001 ! logging rate-limit console 10 except errors enable secret 5 $1$Onlr$fH2gcC0tDCI9hEpkC2/Nq. ! ! ! memory-size iomem 10 ip subnet-zero ! ! no ip finger ip name-server XXX.XXX.1.8 ! no ip dhcp-client network-discovery no mgcp timer receive-rtcp ! ! crypto isakmp policy 1 hash md5 authentication pre-share crypto isakmp key XXXXX address XXX.XXX.37.5 ! ! crypto ipsec transform-set rtpset esp-des esp-md5-hmac ! crypto map rtp local-address BVI1 crypto map rtp 1 ipsec-isakmp set peer XXX.XXX.37.5 set security-association lifetime seconds 28800 set transform-set rtpset match address amarillo ! call rsvp-sync ! ! ! ! ! bridge irb ! ! ! ! interface FastEthernet0/0 ip address XXX.XXX.102.1 255.255.255.224 ip helper-address XXX.xX.6.31 ip nat inside no ip route-cache no ip mroute-cache duplex auto speed auto ! interface ATM0/1 description ADSL SWB XXX-3xxx-1600 Trouble 800-net-help no ip address no ip mroute-cache atm vc-per-vp 256 no atm ilmi-keepalive pvc 0/35 encapsulation aal5snap ! bundle-enable dsl operating-mode auto no fair-queue bridge-group 1 hold-queue 224 in ! interface FastEthernet0/1 no ip address shutdown duplex auto speed auto ! interface BVI1 ip address XXX.XXX.XXX.49 255.255.255.248 ip nat outside no ip route-cache no ip mroute-cache crypto map rtp ! ip nat pool Net-XXX.xxX.218.126.50 XXX.xXX.126.50 netmask 255.255.255.248 ip nat inside source route-map nonat pool Net-64 overload ip classless ip route 0.0.0.0 0.0.0.0 xxxxxxxxxxxxxxxxxxxxxxxxxxx no ip http server ! ! ip access-list extended amarillo permit ip xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx permit ip xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx permit ip xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx logging 10.xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx access-list 1 permit xxxxxxxxxxxxxxxxxxxxxxxxxxx access-list 120 deny ip xxxxxxxxxxxxxxxxxxxxxxxxxxx access-list 120 permit ip xxxxxxxxxxxxxxxxxxxxxxxxxxx ! ! route-map nonat permit 10 match ip address 120 ! snmp-server community RO snmp-server community RW snmp-server packetsize 4096 bridge 1 protocol ieee bridge 1 route ip ! dial-peer cor custom ! ! ! ! ! line con 0 transport input none line aux 0 line vty 0 4 password xxxxxxxxxxxxxxxxxxxxxxxxxxx login ! no scheduler allocate end Amardsl001# -----Original Message----- From: Steve Smith [mailto:[EMAIL PROTECTED]] Sent: Friday, June 01, 2001 8:47 AM To: [EMAIL PROTECTED] Subject: RE: Could someone give me an example config of adsl+router? [7:6756] I use a 827 router. This will go step by step to config one. You need CCO. http://www.cisco.com/warp/customer/794/827_faq.html Steve -----Original Message----- From: Leo Shen [mailto:[EMAIL PROTECTED]] Sent: Friday, June 01, 2001 4:05 AM To: [EMAIL PROTECTED] Subject: Could someone give me an example config of adsl+router? [7:6732] it neednot dial,thanks! Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=6762&t=6762 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]