Is it possible you can post a sanitized config of R1 and R2? v/r, Paul Werner > Hi Group, > > In this simple environment: > > 172.10.12.0/25 > R1----------------------------R2 > > I run RIPv1 between R1 and R2, the network in between is 172.10.12.0/25, > on > R1 I have loopback0 which is 172.10.0.1/32 and another network > 172.10.11.0/28 > directly connected, I saw R1 distributes route 172.10.0.1/32 to R2, but > not > 172.10.11.0/28. > > I understand that 172.10.11.0/28 should not be distributed, but why /32 > route > is distributed, on R2 I saw route 172.10.0.1/32, how does R2 correctly > know > the mask is 32 bits, for I run RIPv1, packet doesn't carry mask. > > I also tried redistribute other /32 routes from OSPF to R1, R1 also > redistribute them to R2, why /32 routes are always redistributed out by > RIP. > > The versions are all 12.0. ________________________________________________ Get your own "800" number Voicemail, fax, email, and a lot more http://www.ureach.com/reg/tag Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=7026&t=7010 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
