If you were running RIP V1 on your network,
correct design would dictate that all the local networks "must"
appear in the routing table of your routers.
If one of your users accesses a network not in the table,
the router would send an icmp "network unreachable" with no IP classless and
an icmp "timeout" error (after a long wait) with ip classless.
This behavior prevents some routing loops, prevents traffic to nonexistant
devices and is good design.
Doug
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=7136&t=7100
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
