The CCO shows something about database information. Below is the result of
searching under 0x1120.
Cisco7500#sh diag 2
Slot 2:
Physical slot 2, ~physical slot 0xD, logical slot 2, CBus 0
Microcode Status 0x4
Master Enable, LED, WCS Loaded
Board is analyzed
Pending I/O Status: None
EEPROM format version 1
VIP2 controller, HW rev 2.3, board revision A0
Serial number: 03516021 Part number: 73-1684-03
Test history: 0x00 RMA number: 00-00-00
Flags: cisco 7000 board; 7500 compatible
EEPROM contents (hex):
0x20: 01 15 02 03 00 35 A6 75 49 06 94 03 00 00 00 00
0x30: 50 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
Slot database information:
Flags: 0x4 Insertion time: 0x1120 (00:03:04 ago)
Controller Memory Size: 16 MBytes DRAM, 1024 KBytes
Does the router boot ??? Are you just trying to understand something that
flashes your screen ???
Phil
----- Original Message -----
From: Randy Espiritu
To:
Sent: Monday, June 04, 2001 11:08 PM
Subject: Cisco 7000 error [7:7214]
> Hi All,
>
> when I power up my Cisco 7000 router, I get this error. Any idea.
>
> Thanks all in advance
>
> System Bootstrap, Version 5.0(8), RELEASE SOFTWARE
> Copyright (c) 1986-1994 by cisco Systems
> RP1 processor with 65536 Kbytes of main memory
> F3: 3570548+114764+289836 at 0x1000
>
> Exception: Level 4 at 0x1120 (PC)
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=7222&t=7214
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]