Jimmy,
Your config doesn't even show the TTY line configuration.
make sure it atleast says this stuff on the tty line config:
modem in out
transport input all
no exec
I'm sure you already knew the default break sequence is Ctrl+Shift+6 x
if you wanted to back out to certain points you can reset the break
sequence.
>>>Brian
>From: "Munoz, Michael"
>Reply-To: "Munoz, Michael"
>To: [EMAIL PROTECTED]
>Subject: RE: telnet, configuration [7:7771]
>Date: Fri, 8 Jun 2001 14:48:52 -0400
>
>What exactly do you mean by stuck? I'm assuming you mean that you enter
>exit but still stay in the router?
>
>http://www.cisco.com/univercd/cc/td/doc/product/software/ios121/121cgcr/dial
>ts_c/dtsprt2/dcdrtlnt.htm#17201
>
>From Link:
>
>Terminating the Telnet session requires first suspending it, then
>disconnecting it. To suspend a Telnet session, enter the escape sequence
>Ctrl-Shift-6 x (press Control-Shift-6, let go, then press x). Enter the
>disconnect EXEC command to terminate the Telnet session.
>
>
>
>Thanks,
>
>Mike Munoz
>
>
>
>
>-----Original Message-----
>From: jimmy halbert [mailto:[EMAIL PROTECTED]]
>Sent: Friday, June 08, 2001 2:17 PM
>To: [EMAIL PROTECTED]
>Subject: telnet, configuration [7:7771]
>
>
>hello guys / ladies,
>I am having problems getting my telnet to work in the lab properly. I can
>telnet to any of the routers; However once there I am stuck and can not get
>back to the access_router or any of the other routers. I have pasted in my
>config, if anyone has a suggestion or sees an error in it let me know...
>
>Thanks All
>
>Jimmy L. HalbertCurrent configuration:
>!
>version 11.3
>no service password-encryption
>!
>hostname Access_Router
>!
>enable secret 5 $1$3s/V$Y84ec8t4.b9HNu2YUvwH/.
>enable password cisco
>!
>ip host Access_Router 2001 192.168.1.1
>ip host r25001 2002 192.168.1.1
>ip host r25002 2003 192.168.1.1
>ip host r25003 2004 192.168.1.1
>ip host r25004 2005 192.168.1.1
>ip host r40001 2006 192.168.1.1
>ip host r75131 2007 192.168.1.1
>ip host r75132 2008 192.168.1.1
>!
>!
>interface Loopback0
>ip address 192.168.1.1 255.255.255.0
>!
>interface Ethernet0
>no ip address
>shutdown
>!
>interface Serial0
>no ip address
>shutdown
>!
>interface Serial1
>ip address 10.1.1.1 255.0.0.0
>!
>router rip
>network 10.0.0.0
>!
>ip classless
>banner motd ^C
>Welcome To The Access Router ^C
>!
>line con 0
>line 1 16
>no exec
>modem InOut
>
>
>_________________________________________________________________
>Get your FREE download of MSN Explorer at http://explorer.msn.com
_________________________________________________________________
Get your FREE download of MSN Explorer at http://explorer.msn.com
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=7791&t=7771
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
