Hey Rashid,
Have you tried setting the interface-type to NNI? I've never actually tried
to make a tunnel before, but I have setup a small lab of frame switches, and
the NNI interface will do that for you.
Fred
>From: "Rashid Lohiya"
>Reply-To: "Rashid Lohiya"
>To: [EMAIL PROTECTED]
>Subject: Frame Relay Tunnel betwixt 2 routers [7:7883]
>Date: Sun, 10 Jun 2001 11:48:59 -0400
>
>Hi all,
>
>I read about extending a frame relay switch by using a tunnel over the
>ethernet link. So I could have 2 routers joined up to make one frame relay
>switch.
>
>My routers are not accepting the command to route dlci over the tunnel
>interface, but ok on serial.
>
>tunnel interface is configured and up/up
>
>int ser0
>encapsulation frame-relay
>frame-relay intf-type dce
>clockrate 64000
>frame-relay lmi-type ansi
>frame-relay route 100 interface serial 1 200 - works ok
>frame-relay route 500 interface tunnel 0 600 - This is rejected, doesn't
>recognise tunnel.
>
>I have tried different platforms, 3600/2600/2500/1700 etc.
>and different IOS releases, 10-12
>
>I saw this config in a doc called "resource guide for building a CCIE Lab".
>The router was a 2501 running 11.3 so I don't understand why it will not
>work for me.
>
>Any hints would be appreciated.
>
>
>
>Rashid Lohiya
>[EMAIL PROTECTED]
>020 8509 2990
>07785 362626
>www.pioneer-computers.com
>London UK
>
>Free Cisco Certification links - www.angelfire.com/home/rashidl
>
>
>
>
>
>--
>Rashid Lohiya
>[EMAIL PROTECTED]
>020 8509 2990
>07785 362626
>www.pioneer-computers.com
>London UK
>
>Free Cisco Certification links - www.angelfire.com/home/rashidl
_________________________________________________________________
Get your FREE download of MSN Explorer at http://explorer.msn.com
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=7959&t=7883
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
