After going through the first lab (BGP), here are some of the errors I've encountered: p. 16 - chart shows three routers all connected to "S0" interface of a frame-relay switch. p. 17 - chart lists Loopback 0 twice. This could mean multinetting a loopback (which I'm not even sure is possible), but I'm pretty sure they mean lo0 and lo1. Numerous discrepancies in the solution configs provided on the CD - it looks like they were modified from a previous revision, but not "proofread." I've tried looking for an "errata" webpage, but have come up empty. And can anyone explain why they would use "ip classless" in all of their configs in Chapter 2? BJ ----- Original Message ----- From: Thomas Crowe To: [EMAIL PROTECTED] Sent: Monday, June 18, 2001 10:53 AM Subject: RE: CCIE lab prep. Is there a syllabus? [7:8385] I have this book, and I confess that I have not totaly picked through it yet. What errors are you referring to? ______________________________ Thomas Crowe Technical Director Research & Development CTS - Atlanta Phone: 770-664-3900 ext 45 ______________________________ -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]] Sent: Saturday, June 16, 2001 6:29 PM To: [EMAIL PROTECTED] Subject: Re: CCIE lab prep. Is there a syllabus? [7:8385] This is a very good book for lab practise, however understand there are alot of errors in the book. > Check out: > > http://www.amazon.com/exec/obidos/ASIN/007212766X/groupstudycom > > This book gives detailed CCIE practice labs and more importantly, also > offers an analysis of the solution. $47.99 from Amazon.com > > Take care, [GroupStudy.com removed an attachment of type text/x-vcard which had a name of Thomas Crowe.vcf] Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=8991&t=8991 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]