Ken,
Congratulations on the equipment. Those are some great pieces. I suggest
setting up the 2621's with Enterprise w/FS Plus IPSec. Check memory
requirements before loading and compare with your memory/flash installed.
With it you can experiment with CBAC, which provides a firewall similar to
the PIX. I recommend getting (2) other routers if possible. The 4000's are
good buy now with 4 serial port module installed (to use as a frame switch),
and a termserver. A 2509/2511 is recommended, but a 508/516 will work as
second choice. Just start checking out labs at www.fatkid.com or in the
All-in-One CCIE LAB book and you will setup your lab many ways doing the
labs.
Good luck
Tim
----- Original Message -----
From: "Ken Browne"
To:
Sent: Tuesday, June 19, 2001 10:10 AM
Subject: CCIE Lab Construction [7:9092]
> Hello. I've recently come into four Cisco 2621's and four Cisco
> 2924 switches. I need to configure this equipment into a lab to
> study for my CCIE lab exam. Any suggestions?
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=9133&t=9092
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
