Hi all, i was trying to configure isdn using a teltone simulator
everything worked fine and checked out till I tried to ping the other
router. i am send two outputs below for claification. As I got it the
spid numbers are not rightly configured. By the way they say with the
switch the spid1: 0835866101, DN: 835-8661 spid2: 0835866301 DN:
835-8663 this what I entered exactly. but they say you can configure
1-800-835-8661 and as 1-800-835-8663 the DN also what should I do?
Any help is welcome.
Omer
The current ISDN Switchtype = basic-ni1
ISDN BRI0 interface
Layer 1 Status:
ACTIVE
Layer 2 Status:
TEI = 96, State = MULTIPLE_FRAME_ESTABLISHED
TEI = 97, State = MULTIPLE_FRAME_ESTABLISHED
Spid Status:
TEI 96, ces = 1, state = 5(init)
spid1 configured, spid1 sent, spid1 valid
Endpoint ID Info: epsf = 0, usid = 2, tid = 1
TEI 97, ces = 2, state = 8(established)
spid2 configured, spid2 sent, spid2 NOT valid
Layer 3 Status:
0 Active Layer 3 Call(s)
Activated dsl 0 CCBs = 1
CCB: callid=0x0, sapi=0, ces=1, B-chan=0
Total Allocated ISDN CCBs = 1
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
